12awg Diy Battery Adapter with Fixing Screw Holes Wire

• --The battery adapter/connector has been tested and can be used compatible for DeWALT 60volt flexvolt batteries. Including models: DCB606 and DCB118X1.
• --The battery adapter/connector is equipped with fixing screw holes, which is convenient for fixing with screws.
• --This is not a charger, it only outputs battery voltage and power directly from the battery.
• --When connected to compatible for Dewei battery, this adapter is only wired to 60V output, not 20V output.
• --Outgoing wire length: 150mm.

Feature:

The adapter has been installed with a 150mm 12 gauge wire.

Description:

Product name: Adapter

Plastic: Mold injection ABS+PC material (black)

Wire: Teflon 1332 12AWG

Outgoing wire length: 150mm

Notice:

1. Do not use this adapter to charge the battery.

2. Do not short-circuit the battery or continuously consume more than 20 amperes of current.

3. Disconnect the battery before reaching 37.5 volts (to extend battery life).

4. Do not charge with 100% power for a long time, it is recommended to store the battery with 70% power (to extend battery life)

Packing list:

Adapter x 1

Note:

The color deviation is subject to actual system configuration and 1-3cm slight dimension difference is allowed due to manual measurement. Please refer to the size chart based on your actual figure.