12V/24V Human Body Motion Sensor Switch Controller for LED Light Strip

On the left is "OUTPUT 12/24 V", which is connected to the LED strip.

On the right is "INPUT12 / 24V", which connects the DC line and the power supply.

In addition, if the order is "-+ +-" from left to right, then "+" "-".

Common thread is "+".

The black line is "-".

Description:

Product type:Sensor Switch

Working temperature: -20 to +60 degrees Celsius
Input voltage: 10.5-16 V or 21-32 V
Output voltage: 10.5-16 V or 21-32 V
Sensing distance: 8M
Induction angle: 60 degrees
Output current: less than 6A
Delay: 1-10 minutes (adjustable)
Size: 76 * 45 * 32mm
Sensing range: 5-8m
Colour: Black
Load power: 5W

user's guidance:
Humen human body sensor switch is an infrared detection controller,
Use infrared detection method to control load switch. Users can according to actual needs,
A human body sensor is installed in the correct environment.
Reconnect the load line and then pass the power line:
Before powering on, make sure that there is no short circuit between the connecting wires:
When someone is detected, the load indicator will light up. When people have time to set the delay time,
The load indicator automatically goes out. The controller signal wire and input wire must be connected.

Packing list:

1* Sensor Switch

Note:

1. The wires must be correctly connected according to the colors provided in the wiring diagram.
2. When the input voltage is 12-24V, the controller works normally.