150w Adjustable Boost Converter Dc-dc 10-32v to 12-35v Step Up Power Supply Module

• --DIY an output adjustable car power supply, you only need to connect your 12V power supply to the input
• --you can freely and continuously adjust the output voltage (14-35V), but the output voltage cannot be lower than the input voltage.
• --Car notebook power supply. The input is connected to your 12V power supply, and the output is adjusted to the voltage of your notebook to work.
• --Boost charger, you can use 12V power supply to charge batteries higher than 12V, such as 24V batteries.

Description:
Name: Boost Module

Module nature: non-isolated boost module
Input mode: IN+ input positive level, IN- input negative
Output mode: OUT+ output positive level, OUT- output negative
Wiring method: no soldering, terminal
Input voltage: 10-32V
Output voltage: (1) Continuously adjustable (12-35V) The default delivery voltage of our store is 19V

(2) Fixed output (optional between 12-35V), please tell the shopkeeper when purchasing.

Output current: 6A(MAX)
Input current: 10A (MAX) (please strengthen heat dissipation if it exceeds 10A)
Output power: natural cooling 100W (MAX), plus fan 150W (MAX)
Easily power a 65W 90W laptop including dual cores
Using a 12V battery with a normal 19V 3.42A laptop, the module temperature is about 45 degrees
Conversion efficiency: 94% (measured when inputting 16V and outputting 19V 2.) (for reference only)
Working temperature: industrial grade (-40℃ to +85℃) (if the ambient temperature exceeds 40℃, please reduce the power to use, or add a fan)
Full load temperature rise: 45℃
No-load current: typical 25mA
Short circuit protection: none (please add an overcurrent protector to the input)
Input reverse polarity protection: none, two tubes are connected in series at the input
features:
1. The power supply of the front stage of the system, when you are working on a project and the input is 10-18V, and your system board needs about 24V power supply and its power is very large, the power of ordinary DC-DC modules is too small , then you will be a good choice if you choose our module, you can work directly on the machine without debugging, and easily achieve high-power boost.
2. To supply power to your electronic equipment, as long as the voltage is adjusted to the voltage you need and the current does not exceed the rated current, it can work normally.

Packing list:
1 x Boost Module
Note:
Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. 
Manual measuring,please allow 1~3mm error,thank you.